Experiments using a novel penetrometer to assess changing strength of clay during remolding and reconsolidation F. Sahdi, D. White, C. Gaudin, 2017, In: Journal of Geotechnical and Geoenvironmental Engineering, 143
An analytical solution for the undrained horizontal–torsional resistance of mudmats X. Feng, M. Randolph, S. Gourvenec, 2017, In: Geotechnique, 67, p. 325-337
Elastoplastic consolidation solutions for scaling from shallow penetrometers to pipelines Y. Yan, D. White, M. Randolph, 2017, In: Canadian Geotechnical Journal, 54, p. 881-895
Experimental and analytical study of X-Section Cast-In-Place concrete pile installation effect H. Zhou, H. Liu, M. Randolph, G. Kong, Z. Cao, 2017, In: International Journal of Physical Modelling in Geotechnics, 17, p. 103-121
Dynamic installation of a torpedo anchor in two-layered clays Y. Kim, M. Hossain, J. Lee, 2017, In: Canadian Geotechnical Journal, 55, p. 446-454
From progressive to catastrophic failure in submarine landslides with curvilinear slope geometries W. Zhang, D. Wang, M. Randolph, A. Puzrin, 2017, In: Geotechnique, 67, p. 1104-1119
Runout of Submarine Landslide Simulated with Material Point Method Y. Dong, D. Wang, M. Randolph, 2017, Procedia Engineering:, 175, p. 357-364
A toolbox for optimizing geotechnical design of subsea foundations S. Gourvenec, X. Feng, M. Randolph, D. White, 2017, Offshore Technology Conference (OTC 2017):, 2, p. 930-968, (Proceedings of the Annual Offshore Technology Conference)
Review of: Tall Building Foundation Design M. Randolph, 2017, In: Australian Geomechanics, 52, p. 119-119
Physical and numerical modelling of novel spudcans for easing footprintspudcan interaction issues M. Jun, Y. Kim, M. Hossain, M. Cassidy, Y. Hu, J. Sim, 2017
Three-dimensional soil-SCR interaction coupled with global SCR analysis J. Choi, B. Jang, J. Kim, Y. Kim, M. Hossain, 2017, p. 85-89
Interpretation of layer boundaries and shear strengths for stiff-soft-stiffclays using cone penetration test H. Ma, M. Zhou, Y. Hu, M. Hossain, 2017, In: International Journal of Geomechanics, 17
Bearing capacity of sandy soil treated by Kenaf fibre geotextile A. Rashid, M. Shirazi, H. Mohamad, F. Sahdi, 2017, In: Environmental Earth Sciences, 76
Foundation punch-through in clay with sand: analytical modelling S. Ullah, S. Stanier, Y. Hu, D. White, 2017, In: Géotechnique, 67, p. 672-690
Engineering and legal considerations for decommissioning of offshore oil and gas infrastructure in Australia J. Chandler, D. White, E. Techera, S. Gourvenec, S. Draper, 2017, In: Ocean Engineering, 131, p. 338-347
Extraction response of skirted foundations and a spudcan on sand-over-clay deposits M. Hossain, Y. Hu, D. Ekaputra, 2017, In: Geotechnique, 67, p. 460-465
Dynamic installation, keying and diving of OMNI-Max anchors in clay Y. Kim, M. Hossain, 2017, In: Geotechnique, 67, p. 78-85
Effectiveness of skirted spudcans in mitigating punch-through in sand-over-clay deposits J. Lee, Y. Kim, M. Hossain, M. Cassidy, Y. Hu, J. Sim, 2017, p. 956-962
Effects of cone tip roughness, in-situ stress anisotropy and strength inhomogeneity on CPT data interpretation in layered marine clays: numerical study H. Ma, M. Zhou, Y. Hu, M. Hossain, 2017, In: Engineering Geology, 227, p. 12-22
Installation and monotonic pullout of a suction caisson anchor in calcareous silt K. Koh, M. Hossain, Y. Kim, 2017, In: Journal of Geotechnical and Geoenvironmental Engineering, 143
